Results 1 to 6 of 6
  1. #1
    Member VolsFan24's Avatar
    Join Date
    Apr 2014
    Location
    Chattanooga, TN
    Posts
    447

    Couple questions

    I have 2 questions.
    1.) I bought the A10 keypad to replace my BP101 Super Dash. The plugs are different. The plug on my BP101 is round and the A10 is rectangular. How can i get the correct male plug to fit the A10?
    2.) Here is a picture of my capacity plate. Does this mean I can put a 250hp on it?

    Thanks in advanced
    Attached Images Attached Images
    1992 Gambler Intimidator with a 1998 Mariner Magnum EFI 225

  2. Member
    Join Date
    Aug 2013
    Location
    Livingston,Tx
    Posts
    2,212
    #2
    Question 2 yes
    2018 Bass Cat Caracal
    Yamaha 225 SHO

  3. Member VolsFan24's Avatar
    Join Date
    Apr 2014
    Location
    Chattanooga, TN
    Posts
    447
    #3
    All the research i did prior to buying the boat said it was rated for 245hp. So when i finally realized the plate I was a little confused.
    1992 Gambler Intimidator with a 1998 Mariner Magnum EFI 225

  4. Member
    Join Date
    Jul 2016
    Location
    Northwest Michigan
    Posts
    728
    #4
    I replaced mine along with all the gauges actually had the boat wiring schematic and new A10 schematic crossed them over and just heat shrunk butt spliced them. When I bought mine I don't think they had an adapter plug or anything or at least the guy I asked about it didn't know of one.

  5. Member VolsFan24's Avatar
    Join Date
    Apr 2014
    Location
    Chattanooga, TN
    Posts
    447
    #5
    How did you wire to the touch pad? Did yours look different on the back?
    1992 Gambler Intimidator with a 1998 Mariner Magnum EFI 225

  6. Member
    Join Date
    Jul 2016
    Location
    Northwest Michigan
    Posts
    728
    #6
    Mine came with a connector and flying leads I believe. My bad I was thinking you had like a wire harness with yours.