Hey guys was noticing the prop starting to slip when I was running about 3/4 throttle wasn't turning or was I in rough water, then I noticed wasn't pulling top speed. When I tried to load it didn't want to push the boat on motor would rev up but nothing. Pulled the prop the hub has some thin cracks running in it never spun a hub, are cracks an issue?
Same symptoms as a friend had. His was a spun hub per his prop man.
Let me be more specific the sleeve has the cracks
I spun a hub one time and the motor would rev (at about 3000-3500rpm's) just before it planed off.
Rocket
It will still plane out but don't think it was as fast as normal
Can you borrow another hub to see? You ought to be able to see if its been slipping on the plastic
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Gonna prob go pick up a sleeve tomorrow
Take it to a prop shop and have them press in a new hub.
99' 201 Pro Elite
08' Evinrude 225 HO
Reply With Quote