G2 model numbers

[Fishin Life]

Can't find anything anywhere about G2 model numbers getting 2015 250 HO G2 model number E250LHOABA wanted to know if someone can explain difference in model numbers thanks for any input

[86 inches]

E: E = Evinrude, A = indicates a counter rotation w/ dynamic power steering (DPS)
250: Horsepower
L: Shaft Length L = 20" long, X = 25" X-long, Z = 30" XX-long
HO: Design Features C = Counter Rotation, D = Evinrude E-TEC, G = Graphite Paint, H = High Output, O = Hydraulic Steering (non-power assist), U = Non-RAVE (300 HP only)
AB: Model identification First two characters identify model version AA first major variant, AB second major variant, AF third major variant, AG, AH etc (Will not use letters from the word INTRODUCES to identify model)
A: Model Revision The third character identifies model revision AA A first revision, AA B second revision subsequent revisions continue A thru Z

So your number is an Evinrude 250 high output hydraulic steering (non-DPS) second major variant first revision.

[Fishin Life]

Thanks for the reply.....any notes about that model number motor

[ChampioNman]

E: E = Evinrude, A = indicates a counter rotation w/ dynamic power steering (DPS)
250: Horsepower
L: Shaft Length L = 20" long, X = 25" X-long, Z = 30" XX-long
HO: Design Features C = Counter Rotation, D = Evinrude E-TEC, G = Graphite Paint, H = High Output, O = Hydraulic Steering (non-power assist), U = Non-RAVE (300 HP only)
AB: Model identification First two characters identify model version AA first major variant, AB second major variant, AF third major variant, AG, AH etc (Will not use letters from the word INTRODUCES to identify model)
A: Model Revision The third character identifies model revision AA A first revision, AA B second revision subsequent revisions continue A thru Z

So your number is an Evinrude 250 high output hydraulic steering (non-DPS) second major variant first revision.

You made my head hurt.

[86 inches]

Thanks for the reply.....any notes about that model number motor

If you would post the serial number, one of the pros might look it up for you.

[86 inches]

You made my head hurt.

That page in the manual should have one of those warning boxes... "reading this may cause severe personal injury "

[ChampioNman]

He sent an engine report, The boat/motor is at Cabela's in NC. Any current recalls are on www.evinrude.com. The selling dealer should make sure that everything is up to date. Make sure you get as much warranty as you have coming to you.

[Fishin Life]

They have checked out everything actually in process of changing the oil tank Evinrude said it needed to be updated and I also talked to Evinrude personally about my warranty its good through 2022.....I have just been wondering what the major differences in the model numbers are is it high end vs low end, thanks for all the info

[ChampioNman]

As far as the actual motor goes they are all the same, now if you got auto-trim, power assist steering those are a few bells and whistles. What about display/gauge package did you get the digital display or did you get the Icon gauge?

[Fishin Life]

I'm pretty sure it has the small digital display

[ChampioNman]

You'll like that.

[86 inches]

That Stratos is going to kick a$$ with that G2! An easy 75 and probably more.
Did you get the hotfoot?
You'll want the optional neck brace, as well.

[bassmasterffej]

Yep...75 no problem...My 201 Evo with Pro XS used to run mid to upper 70s consistently...Top speed of around 77-78...Two guys tournament loaded...

[Fishin Life]

Yes it has hot foot and from everything I've been reading I was figuring 70+ I'm supposed to be picking it up on Thursday I will post some numbers and pictures when I get a chance

[Fishin Life]

2665.jpg

[Fishin Life]

I'm pretty sure that is the digital display beside steering wheel

[86 inches]

Yeah that's the 3.5c display. It will show you just about everything in a bunch of different ways. It effectively replaces all the other gauges you're used to using. Plus, it will allow you to select hotfoot or CSM, auto trim and a couple of other things. If your main digital display is compatible, it might also show motor and boat data.

[Fishin Life]

That sounds good can't wait to get it and start playing and fishing

[CaymasRodney]

That sounds good can't wait to get it and start playing and fishing

As 86 Inches pointed out the torque is absolutely unreal, when u push that hot foot hold on. Make sure you aren't in any tight spaces when you first run it, its crazy responsive