Results 1 to 4 of 4
  1. 09-16-2017, 05:53 AM #1
    Bigfishwilb
    Bigfishwilb is offline
    Member
    Join Date
    Sep 2006
    Location
    San Antonio, pjwilbricht@att.net
    Posts
    448

    NEMA network initial install

    Wanting to retro fit my BC Cougar with a new 250 Yamaha on it for a NEMA system. Can someone please assist.
    I have gen3 lowrance HDS9 electronics.
    I know I also need the connection for motor to the new network system.

    What are are all the parts that I need (with model numbers if possible) to get it set up? Tricks or tips?

    thanks a bunch

    Pat
    Reply With Quote Reply With Quote
  2. walnutshoe
    walnutshoe is offline
    Member
    Join Date
    Oct 2005
    Location
    Lavergne, TN
    Posts
    530
    #2 09-16-2017, 04:24 PM
    If you have the graphs nmea linked now, all you need is the lowrance/ Yamaha cable and a network tee to tie the engine to the network. If not, you will need the lowrance nmea starter kit. Each device plugs into a network tee, so you may need extra t's in addition to the starter kit.
    Reply With Quote Reply With Quote
  3. walnutshoe
    walnutshoe is offline
    Member
    Join Date
    Oct 2005
    Location
    Lavergne, TN
    Posts
    530
    #3 09-16-2017, 04:33 PM
    Biggest issue I had was getting the interface cable thru the rigging tube and engine grommet. Yamaha has an open plug and play cable connection under the cowl. Mine was under the fore port intake runner.
    Reply With Quote Reply With Quote
  4. Bigfishwilb
    Bigfishwilb is offline
    Member
    Join Date
    Sep 2006
    Location
    San Antonio, pjwilbricht@att.net
    Posts
    448
    #4 09-17-2017, 05:37 AM
    Any part number for the interface cable for a 2017 250 SHO?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »