I see the tilt bracket on different adds and it says for 10' / 12'. Will this not work on a 8' are do they make one just for the 8 footer?
I see the tilt bracket on different adds and it says for 10' / 12'. Will this not work on a 8' are do they make one just for the 8 footer?
Minn Kota's website states that the tilt brackets are compatible with all 3 sizes. Probably should call and verify.
2018 Bass Cat Lynx w/Suzuki 250SS.
The 10-12' tilt bracket is built for the 3 stage 8'. Not sure if the made a tilt bracket for the 6-8' two stage ones. Not sure if the mount the same spacing. But the 8-12' 3 stage are all the same
Mercury 250 proxs 2B115089
The bracket itself will work 3pm all Talons, however the kickstand that goes w/ the10'-12' will not fit the groove on the gen1 6'-8' Talons. Minn Kota motors sells the kickstands for around $40-$45
Scott Inman
tilt brackets are not really necessary on the 8ft 3 stage talon because they do not stick up above the motor.
2017 Phoenix 919 Pro-XP 225 Mercury Pro-XS
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!