2 new poles,were working great,now only one goes down,when hit button.the fluid is full.the pump makes funny noise when lowering,,i can turn off main switch a few times and it will start working..let it sit awhile will quit working again...only been deployed about 30 times...thanks
Does this happen with all of the switches? May need to reprogram the remote/pump.
Sam Dunaway
2005 Triton TR-21X
Powered by Suzuki 250SS
Sounds like a board issue, call powerpole have them run a diagnostic thru the app. They will fix you up.
Sounds funny makes me think board issue. But I kinda feel like you may have a weak/ corroded switch that isn't making a good connection.
Mercury 250 proxs 2B115089
I ruled out the corroded connection as he said they were new, so assuming its a new install wouldn't think would be any corrosion but stranger things have happened. Im leaning towards a board, as its intermittent. Try reprogramming remotes first as suggested as it is the easiest thing to try.
ok,refilled reservoir,powered off and on..kept pushing down button..got it to start working again...was no fluid leak anywere..so don't know why was low...seems I reprimed the fluid..and works now...
glad you seem to have it working, however in your first message you said the fluid was full? last message you said you refilled leading me to believe it had little to no fluid in the pump.Originally Posted by 920screaming250
. my first diagnosis would have been low fluid however because you stated it was full i had to rule that out.
sorry,yes I refilled,it was half full..
quir working again...taking it in on Tuesday....
Does it deploy using the buttons on the pump?
Eddie
2017 Phoenix 920 Pro XP Mercury 250 Pro XS
no,push button on pump,makes funny noise ....will post what it was..thanks
TrackerUser
Took to dealer,said pump was bad.....ended up controlboard
Last edited by 920screaming250; 11-03-2017 at 09:09 AM. Reason: wrong answer
put in new board...working great
After 4 hours seek professional help.
Please release me,let me go.
Reply With Quote