Quote Originally Posted by pa.X19 View Post
I'd plug it on the trailer and stick a hose in it and look around, that's to much water. I would fill it past the fittings and if you don't see anything leaking next time on the water check the motor mount bolts.Coming off of plane to quickly will also allow water to flow back in from the bilge. Mine stays dry unless I wash it over the back. I thought about putting a check valve in but its usually not a problem.
Good Idea, I might give that a try. I can lift the front up pretty high and get the water past the fittings without submerging anything important and see if I have any leakage. It would not surprise me if one of the through hull fittings is leaking slowly. Again, not a big deal but with as few spots as I have that can leak, I didn't expect really any water at all. I have not had anything wash over the back yet and so far have been out on calm days so I'm not getting any spray coming in.

If I figure it out, I will let everyone know the rest of the story..