Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Seven Valleys PA
    Posts
    382

    Astro 18FDX Set up info???

    Astro 18FDX Set up info???
    A buddy of mine just got a 1990 Astro 18FDX, need some info on the set up, or at least a good starting point?

    It has a Merc. 150 with a 6in jack plate. Could you give me some info. on Prop to pad measurements, what prop, pitch, and .....?

    What can he expect to get out of it with the right set up?

    Thanks!

  2. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #2
    You need to measure the gear case and see if it's a small case 4.25" dia. or if it's been changed to a large case 4.75" dia. If it's a small case a trophy or small tube laser 22-23" will work and if it's a large case any prop will work. Prop to pad start at 3.5" under and it usually runs 59-60 mph lite.

  3. Member
    Join Date
    Aug 2012
    Location
    Seven Valleys PA
    Posts
    382
    #3
    It's the bigger 4.75" lower.

  4. Member
    Join Date
    Nov 2010
    Location
    Humble,TX
    Posts
    4,377
    #4
    I'd start out around 3"-2.5" below with a 24 trophy.