Water pressure was low for what I'm used to, cruising on plane @ 30-33 mph and graphing was barely 10
Temp still never got anywhere near high though
Water pressure was low for what I'm used to, cruising on plane @ 30-33 mph and graphing was barely 10
Temp still never got anywhere near high though
I would check the prop to pad and wouldn't hurt to throw a water pump in it since u just got it
Bullet 21XRS 250 pro xs serial#2B775575
copy
A few more foot pics too, might help to determine TM or???
Nice rig you got there
Yep, gen1 TM. Best case for that rig with a fishing load. Set it 3/4 below and be done. Should run 83ish solo loaded with that BravoXS and have a great hole shot.
Looks like a std lower unit to me. A fleetmaster i think they call it. I thought the torquemasters were silver? And i have a pair of verados and they dont look nowhere near that. The part the bolts go thru is about twice that thick
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Fleetmaster or std that lower will be fine for that rig nice boat
20XDC250PROXS
Looks like the previous owner plugged the holes so i would assume its already setup i wouldn't worry about it right now i would get use to it and drive it until your comfortable with it.
You got yourself a really nice boat!
2008 BULLET 21XD 2007 Merc 300xs
I do believe it is a tourque master. With the water pick ups in the nose. A fleet master didn't have those and it does have the torque tab in the skeg.
2020 Allison XB 21
Merc 300R
2018-SST Bullet
Merc 300R
Bullet 20XD
300XS DBR
Sure looks like a fresh painted black t/m to me
2005 Stroker 2010-250pro xs
99% sure it is a torquemaster gen 1. Take the seriel number on motor to a Mercury dealer. They can look I up on Mercnet and tell. I was looking at the skeg, it has a torque tab on it. Nice rig for sure. Where are you going to be fishing. I fish Logan Martin in a red/white 20 with a 300XS.
Richard
20XDC250PROXS