After 9 years the seals bit the dust. Put new ones in and also put in a new fuel filter while I was at it. Gonna change my water pump impeller next week. Getting a few add ons here shortly, but that'll be another thread.
After 9 years the seals bit the dust. Put new ones in and also put in a new fuel filter while I was at it. Gonna change my water pump impeller next week. Getting a few add ons here shortly, but that'll be another thread.
2008 BULLET 21XD 2007 Merc 300xs
2005 Stroker 2010-250pro xs
Where did you get the end caps from?
Purdy straight forward.
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Got them from Amazon. They are Sea Star Solutions brand. They average about $90 for the kit, which is end caps, spanner wrench and a few different size o rings to fit your bleeders. Sea Star said these have new ("better") seals in them. Nice aluminum end caps with Nitrile seals. I do like the multiple holes for the wrench. The port side cap is in a tighter spot. Oh and the caps I took out will go to a local hydraulic shop and I'll replace the inner seals and outer o ring for a fraction of the cost of the kit. The hydraulic guy said they have seals of higher grade than what Sea Star puts in them.
Last edited by WVBullet; 08-09-2017 at 12:38 PM.
2008 BULLET 21XD 2007 Merc 300xs
Thanks!
Ronnie
2008 BULLET 21XD 2007 Merc 300xs
Spray some simple green in that jackplate
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
^u have hawk eyes
2005 Stroker 2010-250pro xs
Lol! I was just waiting for somebody to tune in on that! I meant to do that awhile back but have been neglecting my duties. I figured someone would say something about that pretty pink blanket I'm using as a cover while I'm working on it. I got a blue one on one side and pink on the other. They're soft and don't scratch. You won't be able to see much of the inside of that jackplate before long.
2008 BULLET 21XD 2007 Merc 300xs
^ Will need some pics of it
^^^ Absolutely! I have a project about finished and I'll post when done.
2008 BULLET 21XD 2007 Merc 300xs