PVS Plugs for a Trophy 4 Blade Prop

[wallricky]

I have a trophy 4 blade 26p prop. When getting up on plane about 3/4 of the way up my RPM's increases. Thought it was the HUB, put new HUB on and it still does it. Going to try PVS PLUGS. What plugs do I need to start with, small, medium, large or solid? Where's the best place to get PVS PLUGS for this prop? All input appreciated!

[mrdeath]

The plugs will almost certainly solve your problem. I'd buy solid plugs and drill them a little at a time. I run a trophy with 2 holes wide open (no plugs) and 2 medium plugs. Every set up will be different though. Nichols should have the plugs in stock.

[mdtritn21]

Put all solids in it to start with out a cav ring and try it. If it bogs down drill the PVS plugs out 1/4" and try it again.

[Sig556]

I have a 25p trophy plus. I run 2 large hole plugs and 2 solid plugs. Holeshot is awesome, no blowout. I got plugs on Ebay.

[21XDC]

Mark sell all the PVS plug sizes... >>>>> http://www.marksprops.com/products.html