What am I looking at?

[K-DAWG]

Any help that can be provided is appreciated.



Wondering if this stuff is really there or what. I went back over this area and could not find it again. What is it?


What are the white dots on the far left side of the screen?


Same as the one above. What is the white spot of the upper left side of the picture?


Is that prop wash and what are all the specks at the 5 foot mark and below?

[Schins]

Pic #2 looks like stumps

pic #3 might be fish beds

pic #4 maybe a metal bucket? It's reflecting strong.

Pic #5 prop wash

[swardrn]

2 is stumps or it could be a brush pile
5 is prop wash

these arent clear at all what unit are they from ?

[MonteSS]

Is bottom track on manual?

[K-DAWG]

2 is stumps or it could be a brush pile
5 is prop wash

these arent clear at all what unit are they from ?

Helix 9 but, I took a picture of the screen with my phone that's why they are not clear.

[K-DAWG]

Is bottom track on manual?

Don't know what is that and how do you tell?

[swardrn]

Man Im not an expert but your images are not nearly as clear as they should be. Looking at your side imaging shots it looks like you have a source of interference. your down imaging shot looks like it also. I have mega but on my trolling motor I have a 898 and the images it even on the trolling motor are pretty daggone good. Check your settings and look and see what frequency you have it set at. I can easily pick out brush piles on my 898 in 40 ft water and dont even mention mega imaging i can almost count the fish on em. message me if you like ill try to help you all i can.

[druthomas]

HDSI tranducer? I have dual 9si's and my pictures look a bit better, but they didn't until i figured out the correct transducer angle.

[coontie57]

Get the HD transducer I did. A big improvement.