Thread: Rebel1 Help

Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    May 2013
    Location
    Greenville, AL
    Posts
    204

    Rebel1 Help

    Have a 2006 210 Blazer . Just upgrade to a 250 from a 225. I was running a 25 OT4 in the 225 turning 5600 @72-74 depending on load. Do you think the rpm will be around 5900 with the 250? I have to plug the holes bc I am blowing out now with the 250 and didn't with the 225

  2. Blazer Boats Moderator Rebel1's Avatar
    Join Date
    Jun 2004
    Location
    Taylors, SC
    Posts
    12,742
    #2
    It should be turning it at least 5900, if not 6000. Most ran a 26 OT4 with a 210/250 turning around 5900. One thing everyone forgets is the 10% rule with outboards. They can be + or - 10% of the stated HP....that's why you can have the same rigs running differently.

  3. Member
    Join Date
    May 2013
    Location
    Greenville, AL
    Posts
    204
    #3
    Never heard of the 10% rule. That is good to know. I haven't opened up the 250 yet. It has been on a rack since Feb 2017 so I am taking her slow right now. Max power is 5950 correct? The 225 liked to run 1 3/4 below the pad. I assume the 250 would be the same?

  4. Blazer Boats Moderator Rebel1's Avatar
    Join Date
    Jun 2004
    Location
    Taylors, SC
    Posts
    12,742
    #4
    Merc or Yamaha? Both should be on the limiter at 6150. It needs to be propped to run around 5900 in the summer.

  5. Member
    Join Date
    May 2013
    Location
    Greenville, AL
    Posts
    204
    #5
    2008 Mercury Pro XS

  6. Blazer Boats Moderator Rebel1's Avatar
    Join Date
    Jun 2004
    Location
    Taylors, SC
    Posts
    12,742
    #6