Results 1 to 7 of 7
  1. #1
    Member fishwishin's Avatar
    Join Date
    Mar 2010
    Location
    Brentwood (Calif. Delta)
    Posts
    750

    Trailer fenders for 198

    Hello all,

    I need a new new set of fenders for my tandem 198 trailer. Does anybody know a good source or possibly a link for a direct match?

    Thank you!

  2. Member
    Join Date
    Jul 2014
    Location
    Chesterfield VA
    Posts
    3,402
    #2
    Probably best bet is to get in touch with EZ Loader parts to start. They list a bunch of different fenders, but I wouldn't know which is the correct fit.
    Kevin | 2000 Champion 19​1 | 2000 Yamaha OX66 200hp

  3. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,545
    #3
    Could be a good time to go stainless steel while your at it.

  4. Member fishwishin's Avatar
    Join Date
    Mar 2010
    Location
    Brentwood (Calif. Delta)
    Posts
    750
    #4
    Found this in the archives. Thanks all!

    http://www.bbcboards.net/showthread.php?t=475319

  5. Member fishwishin's Avatar
    Join Date
    Mar 2010
    Location
    Brentwood (Calif. Delta)
    Posts
    750
    #5
    Crud! In further reading it looks like MFI is now closed ��

  6. Banned
    Join Date
    Aug 2011
    Location
    Boerne & Three Rivers, Texas
    Posts
    18,061
    #6
    It's a pretty standard size, only problem you will have is finding one with the Champ logo on it. If you don't care about that then you have no issues. Well, blue paint might be an issue.

  7. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,842
    #7
    Yes, MFI is gone. Measure the length and the width both at the bottom and top and possibly the height. You'll find find them at EZ Loader or somewhere. Good bet that MFI was buying them from someone. Finding one with Champion logo is probably out of the question unless C&O has any.