What hub kit will I need to put a Fury 4 on a 225 SHO?
What hub kit will I need to put a Fury 4 on a 225 SHO?
You have two choices...The Guardian SQ Hub kit or the Mercury Marine with the Square Bore hub.
https://www.turbo-props.com/smarty/t...ion_Charts.pdf
http://www.boatpropellerwarehouse.co...lver-8m0075402
Is one better than the other?
really just personal preference, Mercury hub kits are usually much easier to find.
thanks a local shop will be getting in some Fury 4 blades for demo soon and will try one out.
Anyone know how many vent holes to leave open on a fury 4 blade for a SHO 225?
That's what I thought just making sure
I run two out and it does fine. Jumps on plane and no blow out.
Can you post what rig you're driving and all your numbers with the Fury 4?
Top speed
RPM at top speed
Boat and motor
Jackplate or not
Hole shot
Thanks
ok Got a Fury 4 24p to put on my SHO 225 I also bought a 8M# hub kit does anyone have a picture of how that fits together? assume I take e thrust washer that is on propshaft off
Go to post #8
http://www.bbcboards.net/showthread....ight=8M0075402
so if I am looking at that post correctly you leave the washer from Yamaha on and stack the new washer on top of it?
The one closest to the gear case
Stack them, the same way the VMAX Prop are installed using 2pc thrust washers.
ok the way the lines were drown in that picture looked like you leave on the Yamaha one
You leave 1 of the 2 on.
That must be a Yamaha prop thing . I'm running a sho and only use one trust washer no stacking of washers with the two Mercury props I'm running for the last 100 hrs .