Page 1 of 2 12 LastLast
Results 1 to 20 of 22
  1. #1
    Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185

    1991 Sprint 286 Pro Tournament Wiring Diagram

    Hey all! Just wanted to share a photo of the wiring diagram that is under my aft hatch. Maybe someday it will help someone out!



    If anyone wants the original picture at the higher resolution please follow the link below to the original picture on my web-site.

    http://rbractionphotos.com/SPRINT/SP...11%20071-2.jpg
    Last edited by TNFLYINGRIZZLY; 07-13-2012 at 04:05 PM.





  2.  
  3. Moderator basfshr27's Avatar
    Join Date
    Jul 2007
    Location
    Gautier, MS
    Posts
    4,561
    #2

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (TNFLYINGRIZZLY)


  4. Member
    Join Date
    Mar 2006
    Location
    McCalla
    Posts
    270
    #3

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (TNFLYINGRIZZLY)

    Pls send me the original. I can really use it.

    Thx in advance.

    bamablacksmith@comcast.net


    Mike

    Mike Linn
    Artist Blacksmith
    Bass Fisherman
    Sprint 296Pro / Optimax 200L
    McCalla, AL

  5. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #4

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (bamablacksmith)

    You Should Have it!





  6. Member
    Join Date
    Jan 2011
    Location
    ottawa
    Posts
    8
    #5

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (TNFLYINGRIZZLY)

    Please send me the high res copy.

    jean_burger03@hotmail.com

    Thanks.

  7. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #6

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (Axle)

    Just sent it!





  8. Member
    Join Date
    Apr 2011
    Location
    Willmar, MN
    Posts
    35
    #7

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (TNFLYINGRIZZLY)

    Please send the high Res version

    Thanks in advance

    Bill

  9. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #8

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (Billn)

    Hey Bill I need an email address for you





  10. Member
    Join Date
    Jul 2011
    Location
    Prairieville
    Posts
    1
    #9

    Re: 1991 Sprint 286 Pro Tournament Wiring Diagram (TNFLYINGRIZZLY)

    I just picked up a 266 Pro. I would love a copy.
    Thanks
    ccharles48@yahoo.com

  11. Member beck125's Avatar
    Join Date
    Jul 2011
    Location
    jc
    Posts
    532
    #10
    High res PLEASE AND THANK YOU!!!!
    jlb_2009@msn.com
    Kustom kicker Jigs
    FireHawk 200 99 dc, 200 Venom, 26p raker. 6" Hijacker

  12. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #11

    Re: (beck125)

    You got it! Sorry it took so long! I had a long night at work tonight and just made it to my office!





  13. Member
    Join Date
    Sep 2011
    Location
    ZEPHYRHILLS
    Posts
    2
    #12
    CAN YOU PLEASE SEND THE HIGH RES PIC
    tmhall018@yahoo.com
    thanks tommy

  14. Member
    Join Date
    May 2012
    Location
    Spring, TX
    Posts
    8
    #13
    I'd like to get a copy of this as well dustinsmith@cgsblueflame.com

  15. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #14
    Hello everyone! I just wanted to appologize to the good people asking for a copy of the original. I have been in and out here lately with work keeping me very busy. So to help those of you who would like a copy of the original, I have uploaded it to my personal web-site and provided a link to the picture in the original stickied post. Hopes this helps!





  16. Member
    Join Date
    Jul 2012
    Location
    Burlington Vermont
    Posts
    6
    #15

    Sprint Boat Diagram

    Please send me a high resolution copy of the diagram. A pdf copy would be best if possible. Thanks. Also does your boat have switches over the valve actuator for the livewell drain and the recirc/pump valve? What is the purpose of these switches? Thanks again.

  17. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #16
    Just click on the link in my first post. I have put the full res photo on my website for ease of access. My livewell drain is cable controled by a manual selector valve. The switches I have are for the pump are just to turn the pump on manually or auto which uses the timer.





  18. Member
    Join Date
    Sep 2012
    Location
    Bakersfield, Ca
    Posts
    6
    #17
    I have a 1999 Sprint 289FS If anyone out there has a wiring diagram for this boat I would greatly appreciate it

  19. Member
    Join Date
    Sep 2012
    Location
    Bakersfield, Ca
    Posts
    6
    #18
    I would appreciate a copy of the wiring chart. Maybe this will be similar to a Sprint 289FS Thank you

    rs5242753@aol.com

  20. Member
    Join Date
    Apr 2013
    Location
    Houston, TX
    Posts
    8
    #19
    Hey Chad, I have the same boat make and model. I'll try to take some better pics of it to share - been trying to buff out some oxidation and go thru that process, but still looks great for its age. It's still fairly new to me since I bought two years ago so I welcome any tips unique to the boat. My livewell was cracked when i bought it so that hasn't been so easy to work with for patching the plastic but applied some plastic adhesive the other night from JB Weld so now i just need to test with the water hose. Otherwise pretty disappointed with the Sprint boat manual as its so generic, there's really little value but to describe high-level boating ops.

  21. Member TNFLYINGRIZZLY's Avatar
    Join Date
    Mar 2011
    Location
    Covington, TN
    Posts
    185
    #20
    There is no doubt you bought an awesome boat. I have known my boat since the original owner purchased it. I just finished recarpeting mine last summer. Well worth the time and effort. Next thing on my list is the electrical and the switches. Definitely time for an update. I went through the whole Basscat7 oxidation removal process about two years ago and it is well worth the time and energy. I used all the recommended supplies as well. The only thing to be careful about is wet sanding around the corners. I was a little to eager on a couple of spots but its ok. I have been using ProTec and Bass Boat Saver and she still looks damn good! About the only thing I dont Like about my boat is the fuel tank and one day there will be a project to find another solution. Now that good weather is upon us I plan to use her often so upgrades will have to wait!





Page 1 of 2 12 LastLast

Similar Threads

  1. Need wiring diagram for a 2000 Tracker V18 Tournament!!
    By Lance1980 in forum Electrical/Wiring/Trolling Motors
    Replies: 2
    Last Post: 10-13-2011, 01:20 PM
  2. Replies: 3
    Last Post: 06-04-2009, 07:52 PM
  3. anyone have the wiring diagram
    By fishercurtis in forum Trailers & Towing
    Replies: 1
    Last Post: 10-31-2007, 08:04 PM
  4. wiring diagram
    By 87GT183 in forum Yamaha Motors
    Replies: 3
    Last Post: 03-17-2007, 01:29 PM
  5. 95 OMC Wiring Diagram
    By Doormaster in forum Stratos/Javelin Boats
    Replies: 2
    Last Post: 01-05-2007, 08:42 PM