Opinions on VT2 vents

[wv21ss]

Just curious of everyone's opinions. Good or bad? Pros and cons. I'm really hesitate about drilling three inch holes in my livewell lid

[davesz518]

Drill em.....can't hurt.....let's obnoxious gas out of the live wells......frisky fish in 90 plus degree water......yet to lose a fish.

[TD3]

Best thing I have ever done for fish care. Don't try to do some $5 hardware store fix.....These things are specifically designed to do what they do. You can run your pumps 1/2 as much and the fish will be twice as lively.

Best $$$$ you can spend on a boat in my opinion.

[2500]

But does it help on C models with plexiglass slides? I think air will move around but seems like you'd need to drill several holes in plexiglass

[Mike A]

But does it help on C models with plexiglass slides? I think air will move around but seems like you'd need to drill several holes in plexiglass

Did that. Don't regret it for a moment. Just two holes that match up to the VT2's.

[RngrBill]

Look nice and work great!

[mossie3]

Can't hurt. Look for a 3in hole saw to borrow, or you'll spend $20 drilling 2 holes, and use anti-seize lube to prevent galling when tightening the ss bolts.

[wv21ss]

I have everything but the nerve to drill the holes lol. I guess it isn't going to weaken the lid or cause any negative affects to anything

[skeeterator]

I love mine. Don't do like my brother did and use a 4 inch hole saw, let's just say he wasn't real pleased with his results lol.

[Dh0ckey11]

I probably wouldn't have installed them myself, but I bought a used boat that had them and I will install them on any new boats I get. Just fished on Barkley with 91/92 degree surface temps. No dead fish! I haven't noticed any weakening of the livewell lids. All of my other lids could use some stiffening though :(.

[slaunch]

run the hole saw backwards to get it started through the carpet so it doesn't grab and tear a big chunk out of it.

[squib]

Could you just swap out the handles for these and then not have to cut additional holes? Then cut the bottom o


http://www.go2marine.com/product/233...RoCurcQAvD_BwE

[Stratos33]

That is what I was worried about! How to keep the hole saw from destroying the carpet

[96MrBass]

Drill em.....can't hurt.....let's obnoxious gas out of the live wells......frisky fish in 90 plus degree water......yet to lose a fish.

Well said and I haven't lost a fish yet either.

[Rangerglenn372]

That is what I was worried about! How to keep the hole saw from destroying the carpet

Run your holesaw in reverse and it will make a clean cut through the carpet!

[GhostComanche]

Could you just swap out the handles for these and then not have to cut additional holes? Then cut the bottom o


http://www.go2marine.com/product/233...RoCurcQAvD_BwE

Please don't confuse this with the V2T Vents.....................RR

[fishfarm]

Could you just swap out the handles for these and then not have to cut additional holes? Then cut the bottom o


http://www.go2marine.com/product/233...RoCurcQAvD_BwE

No the V2T has a specific design to it to function properly.

[KandKKustomz]

Please don't confuse this with the V2T Vents.....................RR

agreed not even close to the real thing, there not expensive..get the real deal. I swear by them.

[squib]

Turn one forward; turn the other backward. Tell me the difference. I'm buying neither. Give me the physics.

[squib]

Please don't confuse this with the V2T Vents.....................RR

Oh, I won't.