My pro190 tracker trolling motor is a 12 volt I'm needing to change to a 24 volt, is the wiring needing to be changed?
My pro190 tracker trolling motor is a 12 volt I'm needing to change to a 24 volt, is the wiring needing to be changed?
Look on the jacket of the wire for a AWG #. Needs to be 6 ga. marine (tinned) and also need a 60 amp breaker.Originally Posted by Jdkeen
Minn Kota has specific recommendations for wiring in an easy to follow chart. Check it out:
https://www.minnkotamotors.com/Batte...ction-Rigging/
Joe B
2017 Tracker PT 190 TX
2017 Mercury 115 Pro XS
Mercury Spitfire X7 19” prop
51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
4.2 second Hole Shot (measured using Vessel View Mobile)
Engine mounted in 3rd hole
Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
Humminbird Helix 12si Gen1 chirp on console
Humminbird Helix 15si Gen4 cho on bow
Humminbird Mega360
Dotline two step transom boarding ladder
Tracker trailer bow boarding step
Reply With Quote