Boat: ranger z520 250 etch, 2 talons fully loaded
Current have a tempest with a 26" pitch, poor hole shot.
I would like to purchase the fury 4 but I am not sure of what pitch to get. Any suggestions? Do I go with 24" or 25"?
Thanks
Boat: ranger z520 250 etch, 2 talons fully loaded
Current have a tempest with a 26" pitch, poor hole shot.
I would like to purchase the fury 4 but I am not sure of what pitch to get. Any suggestions? Do I go with 24" or 25"?
Thanks
First off What rpm's and speed did you get with the tempest. Tempest is usually 1 pitch lower. Fury 3blade and Fury 4 blade run the same pitch
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
With my tempest 26 pitch I am getting 5800-5900 rpm. 65mph
Whats the motor max rpm. So far something doesn't sound right
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
Max is 6000 rpm
The Fury 4 only goes up to a 26p. I think you need to private message Ghostcomanche. The man knows how to setup a Ranger. I believe he can give you the correct answers. http://www.bbcboards.net/private.php?do=newpm&u=8952
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
Thanks a lot for your help! I'll definitely contact him.
So my new 25p fury4 is installed....no other adjustments made only a prop swap and I noticed a hug difference with holeshot. Feels like a new boat.
What kind of plugs did you have in the Tempest?
Layton Strong
Nitro State Team
I believe it's a 3/8 opening on the plug
It's a 26" tempest and needs some work to run right. Small PVS plugs are too small for the Z520 and it probably needed more venting.