Anyone out there done this? I really want to do mine but would like some insight before I cut a hole.
Anyone out there done this? I really want to do mine but would like some insight before I cut a hole.
I see this is an old post. Did you ever cut a hole and add recess for foot pedal? If so how did it go? I also have a 196. just curious what motor and prop your running and what speed your getting out of it? I have been trying a few different props out.
Nope, I never could find anyone that had done it so I didn’t want to chance it. Im running a Johnson 175 with a 22 Raker. Not a speed demon but rides better than any boat I’ve ever owned. Loaded down with full tank of gas, full live wells, and two men and gear 57 mph. By myself it’ll run 61 mph.
I did mine cut away .
Plenty of room for recessed trolliing motor pedal. Running a 24 raker, and 25 renegade on mine.
I love my 205 but i am putting a 24 prop on it to get a better hole shot i am going to do recessed tray to for trolling motor
QUIT WISHING AND GO FISHING🐟
08 skeeter I class 08 yahama 250 98 HYDRASPORT 205 98 EVINRUDE 200 to many other boats to list
Has anyone done this to a LS 206
I put a recessed trolling motor tray for my Ultrex on my 94 Hydrasports LS 205. Plenty of room. I can add picture if needed.
Yes please do. I will be doing it in a week or two.
Will take pictures and upload in the morning.
This is the unit I put in my boat. https://comfortroll.com/shop?olsPage...fortroll-d-lux Will send boat pictures tomorrow.
You guys think I can get the same recess tray for my boat? Would I have enough clearance? I have a Motor guide xi5.IMG_5126.JPG