How do I test the accessory pad on the bow I'm suspicious of the plug. I don't think just a plug is available, it's part of the wiring harness. Z21
How do I test the accessory pad on the bow I'm suspicious of the plug. I don't think just a plug is available, it's part of the wiring harness. Z21
Dave Swimm - Ranger Z21, Yamaha Vmax 250 HPDI
‘17 Shearwater X22 Hybrid, Vmax 250 SHO
I can't leave anything stock, I can't leave well enough alone.
I need to customize everything. I think I can improve others
designs, sometimes.
Dave, mine went out after running some real rough water, and it turned out to be the plug, but at the other end of the harness. Actually under the console. There is a big plug block with several plugs connected. The one that is everything 'up-front' is on the bow-end, and outside on the plug block. I also started up front, but finally tracked it back to under the driver's console. They are 'snap' type plugs, but mine was not pushed in enough to lock in place. After I got it pushed in enough to lock, I've never had a problem. Hope that helps.
Bryan O' Z521-250ProXS V8
Total Recreation Products Inc.
Commercial Park and Playground Equipment
totalrecreation.net
Exact same happened to me...Originally Posted by Bryan O
Reply With Quote