-
Johnson 150 headache.
2006 stratos 285 pro with 2006 johnson 150 brp(j150glsde ). 6" jackplate prop 2 pad is 3.5". Turning a 23p michigan rapture prop. At wot it's running 56 with only 4500 rpm. I would think it sling a 23 easy so I changed plugs de-cared compression is good all cylinders 115. Water pressure is 20 at wot. Bad prop or what?
-
Your tach is off if the speed is GPS. You would only be doing 50 at 4500 rpm's. You can remove the prop and on the back there should be a setting screw that you can turn left and right a few times then return it to the original setting and that could clear up the tach.
-
II assume you mean taking the tach off. I'll give that a try next time out. I just recently replaced that tach it's the system check/tach combo maybe didn't set it right. I appreciate the reply.
-
Get a 24 Raker. I have a 2004 285ProXl with 150 Johnson, same set up as yours but 3 3/8" prop to pad. 61mph at 5400-5500, great lift with the Raker. Mine has been worked by Mark.
-
I got bought one from the prop page so well see how it works
-
-
I got a raker 2 prop with a tbx hub kit. It didn't come with a thrust washer so can I use my flo- torq thrust washer or are they different?
-
-