Thread: Fury 4

Results 1 to 5 of 5
  1. #1
    Fishfarm (Jay) fishfarm's Avatar
    Join Date
    Mar 2009
    Location
    Kingman Arizona
    Posts
    2,290

    Fury 4

    Just wondering if any of you guys have tried a fury 4 on your rigs yet
    2000 520vx Ranger
    250 PRO XS
    SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade

  2. Member low slung cruiser's Avatar
    Join Date
    Jul 2008
    Location
    LKG, LITTLETON, NC
    Posts
    4,858
    #2
    Not big enough for my rig... turned it past rev limiter fast at 78
    Sterling 22XS / Mercury Pro XS V8

  3. Fishfarm (Jay) fishfarm's Avatar
    Join Date
    Mar 2009
    Location
    Kingman Arizona
    Posts
    2,290
    #3
    Thats right. I forgot they only go to 26P
    2000 520vx Ranger
    250 PRO XS
    SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade

  4. Member
    Join Date
    Jul 2010
    Location
    Pleasant Grove, Alabama
    Posts
    1,633
    #4
    Buddy of mine tried one on his Z9 Nitro. I think a 25 or 26 pitch. It lasted 4 times out and slung a blade... That's the only one I know anything about right now.
    '06 Gambler 2100
    '06 Mercury Racing 250XS

  5. Fishfarm (Jay) fishfarm's Avatar
    Join Date
    Mar 2009
    Location
    Kingman Arizona
    Posts
    2,290
    #5
    So far so good with mine it's a 25 pitch as well. That prop pushes my ranger better than any prop I've ever had on it and I went through a lot of trial and error and props. I know this might be slow to you guys but it will push my ranger at 74 miles an hour with 58 gallons of fuel fastest I've been with a light load West 76
    2000 520vx Ranger
    250 PRO XS
    SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade