Page 1 of 2 12 LastLast
Results 1 to 20 of 22
  1. #1
    Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938

    Conroe area - Prop setup

    I am looking for someone (dealer, prop shop, person) that you would recommend to set up a boat for the area. I have a 2017 blazer 625 with Verado pro 250 and looking to get the prop dialed in for Conroe area as I am moving there from out of state and have been running at 4000-6000' of elevation. I do have a bob's 10" hydraulic plate on it and figure someone that has access to props (and more high performance boat experience to know how to adjust for little things) can do this much quicker than I can to dial in the weight balance, the prop, jp height, etc.

    Also if they are a humminbird guru that is a bonus as needing some help on my images as for some reason image issues recently (last time I was out) and may want to add SI transducer to my ultrex if possible so not using the one off the transom.

    Definitely will pay for this assistance.

    THANK YOU in advance.
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  2. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,423
    #2
    U can't run fast on Conroe.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team

  3. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938
    #3
    Want to set it up to run on rayburn, TB, etc. Just living on Conroe so figured someone in that area is where they'd need to be so I don't have to take it 3 hrs away to have some dial in the prop....
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  4. Member
    Join Date
    Feb 2007
    Location
    Tomball, Texas
    Posts
    5,035
    #4
    Not really sure of anyone in the Conroe area. Troy Kirk at Capt Kirk's might be able to help, not sure.

    I would almost recommend Scott Jordan at Jordan's Marine in Vidor, he is pretty good from what I hear. Runs racing Mercs.

    As to the Humminbirds, I just did an Ultrex install on my Phoenix with an HDSI transducer.

    And as far as BMCD's comment about Conroe, running fast is killer this time of year.

    Good luck on the move.
    2021 Phoenix 819 - Mercury 200 Pro XS - Ser No 2B779353
    Ultrex/Humminbird Helix 12 SI Mega/Helix 10 Mega DI/Mega 360
    Garmin 1022 with LVS34

  5. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,423
    #5
    I'd post on the Blazer forum, if not already. I'm not aware of anyone that offers this. I think there is a guy on Fork.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team

  6. River Rat pYr8's Avatar
    Join Date
    Apr 2010
    Location
    Trinity R./L. Livingston
    Posts
    11,087
    #6
    I don't know about Conroe but there's some boat hotrod guys at 356 Marine on north Livingston, last name of Cheatham. HTH

    ~~~~~ Bury my soul where the blue bonnets grow ~~~~~~
    https://www.mccainfishing.com/

  7. Member
    Join Date
    Jan 2010
    Location
    Hemphill,Tx
    Posts
    10,527
    #7
    Jordan in Vidor is very knowledgeable. Steve's custom props in Quitman (Lake Fork) is a guru. Either will need to know WOT rpm's in Texas weather and elevation in order to begin the process.

  8. Member
    Join Date
    Jul 2014
    Location
    Crossville, TN & Houston, TX
    Posts
    3,466
    #8
    I've asked a Conroe guide, Butch Terpe, for a recommendation for you. He has been guiding on Conroe since the late 80's. If he gets back to me, I'll post it up here. Where are you coming from? I spend summers at 2000 feet. in TN.
    richg99

  9. Member
    Join Date
    Jul 2014
    Location
    Crossville, TN & Houston, TX
    Posts
    3,466
    #9
    Bigguy..here is the info I received from the Conroe guide Butch Terpe...
    Give Richard Tatsch a call at 936-291-1227. I think he can help you out.

  10. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938
    #10
    THANK YOU!
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  11. Member C130's Avatar
    Join Date
    Nov 2016
    Location
    Magnolia, TX
    Posts
    3,616
    #11
    I fish on Conroe weekly out of a Bass Cat. I'm running a Fury 4 25 in the summer as I'd rather have the hole shot than top speed. Conroe is so rough in the summer that top speed isn't much of an option except maybe first thing in the morning. I run a 26p in the cooler months and when the summer traffic gets off the lake. Where are you moving from?

  12. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938
    #12
    I ran a 26 fury 3 on my opti 250 puma ftd at low altitude previously but verado little different and in a blazer hull which likes the motor higher than some others.
    Moving from the rockies. You running opti or verado?
    Last edited by Bigguyone; 07-02-2017 at 12:42 PM.
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  13. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938
    #13
    Ill probably run a bravo 26 or so (guessing pitch) for hole shot on conroe then will need to prop it for rayburn, TB and others where top end more important...
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  14. Member C130's Avatar
    Join Date
    Nov 2016
    Location
    Magnolia, TX
    Posts
    3,616
    #14
    Opti, didn't notice you had the Verado. I almost moved south of Denver but decided against it. Bass fishing, or lack there of, was a deciding factor. So, now I commute back and forth to Denver weekly.

  15. River Rat pYr8's Avatar
    Join Date
    Apr 2010
    Location
    Trinity R./L. Livingston
    Posts
    11,087
    #15
    Quote Originally Posted by C130 View Post
    Opti, didn't notice you had the Verado. I almost moved south of Denver but decided against it. Bass fishing, or lack there of, was a deciding factor. So, now I commute back and forth to Denver weekly.
    Now THAT'S dedication!!

    ~~~~~ Bury my soul where the blue bonnets grow ~~~~~~
    https://www.mccainfishing.com/

  16. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,938
    #16
    Someone has to know a performance person that is a "prop head." I have tried to call Rich a few times that was recommended above but cannot seem to reach him.
    I called and talked to Captain Kirk's and they were going to see if anyone there could help me but it has been about 2 weeks and no call back yet.
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  17. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,829
    #17
    I know it's not local, but holler at Steve's Custom Props at Lake fork. He will get you fixed and treat you right ...

  18. Member
    Join Date
    Jul 2014
    Location
    Crossville, TN & Houston, TX
    Posts
    3,466
    #18
    The Conroe guide, Richard Katsch, phone number was given incorrectly to me, and I forwarded it on to you...incorrectly.

    Here is his web site.... http://www.fishdudetx.com/

    Phone number was (correctly) 936-291-1277

    richg99

  19. Member C130's Avatar
    Join Date
    Nov 2016
    Location
    Magnolia, TX
    Posts
    3,616
    #19
    Quote Originally Posted by pYr8 View Post
    Now THAT'S dedication!!
    I also looked at the cost to buy a home, taxes, etc. My son is going in to his junior year at Magnolia. He loves to fish, so do I, so I really thought it over and decided not to move. I was really excited about it and being from Tennessee I love the mountains and the seasons. If they had decent bass fishing I'd be there already but just couldn't take my son away from what he loves to do more than anything.

  20. Member
    Join Date
    Jul 2014
    Location
    Crossville, TN & Houston, TX
    Posts
    3,466
    #20
    Good father...

Page 1 of 2 12 LastLast