For night loading and "bling" halo ground effect on the trailer.
Installation 6-21-17.
Boat: 2009 Ranger Z21 Intracoastal
2 outside bunks 5'.
2 inside bunks 12'.
New KDAT 2X6 #1 Grade wood bunk boards. (Kiln Dried After Treated) This is premium straight wood with no knots/bark scuffs. Not cheap!
Routed for LED lights 1" in from outside edges. *Anything more than one LED strip per bunk placed like this is overkill IMO.
Bluewater white LED light strips. One per bunk. http://gatorbak.com/blue-water-led-lights/
Primed/painted white on top/sides.
Gatorbak Premium Clear 2X6 bunk covers & end caps. http://gatorbak.com/gb550-premium-clear-bunk-cover/
Reused all SS lag bolts/washers.
12 gage wiring/marine heat shrink butt splices/heat shrink 3/8" & 1/2"/3/8" wire loom all secured inside of rear support.
Daisy chained bunks at rear of trailer and tied into license plate lamp feed.
Total cost for all items: $991.84
Daylight lit
On trailer pic's
On trailer drive by video
In water pic's
In water loading video
These lit bunks replaced perfectly good 3+ year old Gatorbak white bunks to upgrade to the lit bunks.
For information on these bunks contact Jonathan here:
http://www.bbcboards.net/member.php?u=100377