Results 1 to 9 of 9
  1. #1

    Epoxy vs clear nail polish- best protection against chipping?

    I've used some teflon clear nail polish some to protect the finish on purchased lures. Would epoxy protect against chipping better?

  2. Green Fish Bait Brewery
    Join Date
    Oct 2013
    Location
    Fairhope, Al
    Posts
    782
    #2
    Epoxy is harder and wears better. You do have to mix and deal with odor and st up times.
    Ron
    Green Fish Bait Brewery (FB)
    Veteran

  3. Member
    Join Date
    Jul 2009
    Location
    Libertyville, IL
    Posts
    803
    #3
    Epoxy, Devcon 2 Ton (30 minute), no odor.

  4. Member
    Join Date
    Sep 2013
    Location
    KY
    Posts
    2,317
    #4
    Epoxy by far. You'll need the longer cure time (30 min, etex,...) and a turner to level it.

  5. Banned
    Join Date
    Mar 2014
    Location
    Chesterfield, VA
    Posts
    108
    #5
    .
    Last edited by offthechain69; 06-24-2017 at 12:30 PM. Reason: Might come across as negative

  6. Member
    Join Date
    Sep 2016
    Location
    Houma LA
    Posts
    981
    #6
    Most of the fly tiers have switched to the UV cure epoxy since you don't have to turn it and you can spot cure specific areas with the UV flashlight.

  7. Banned
    Join Date
    Mar 2014
    Location
    Chesterfield, VA
    Posts
    108
    #7
    .
    Last edited by offthechain69; 06-24-2017 at 12:30 PM. Reason: Whinners

  8. Member
    Join Date
    Oct 2007
    Location
    Hagerstown, MD
    Posts
    4,208
    #8
    Devcon 2 ton 30 minute epoxy is better but requires more work. Sally Hansen hard as nails fingernail polish works great for quick jobs.

    Allen

  9. Banned
    Join Date
    Jun 2012
    Location
    grovetown ga
    Posts
    232
    #9
    definetly devcon 2 ton 30 min, get cheap small paint brushes at walmart mix it an apply with light long strokes no turning needed hang an cure for about 24 hours make sure eyelits are not coated, you can put tape on bill an hang bait with roach clip attached to bill, ace h/w is where i get my epoxy.