Anyone had issues with clearance on PP adapter?

[adchunts]

Bought a Power Pole braced adapter (part PKB-S-2-2-S-BK) to replace my non-braced adapter on my 2007 Sabre. Regardless how I position it on the Slidemaster plate, it hits the hull. Have a query in to Power Pole, just wondering if anyone else had run across this.

[neo]

Can you post a photo?

[Bass Cat Boats]

Power Pole brackets can require some minor alterations and they have an excellent engineering staff to assist you.

[jcdogfish]

Watching this one close, please post a followup when you get the info. I have one of my brackets very close to the hull

[adchunts]

Here is a photo of the new adapter:



Also sent this photo to Mike @ Power Pole. Hope he can offer a resolution.

[bigbass225]

I had a similar problem... the left and right sponsons are not exactly the same I had to go to a longer setback plate adapter to make mine clear! Now I have 7/8" clearance on the right and 3/8" on the left side

[Bass Cat Boats]

The offset is left in the hulls sponson from designs where steering required more room on one side, allowing for cable steering.

[Powerworm]

Mine sits about 1/2" away from the Hull, no signs of it ever touching. I'm assuming there is only one clear choice as far as Part number for a Sabre and your brand jackplate. ( I installed mine a long time ago ) I would Email Power Pole as well and see what they say.

[jcdogfish]

I can see where mine has touched

[adchunts]

Received a response from Mike Schmidt @ PP this morning. He advised I needed part number PKB-S-5-4-S-BK to correctly position my PP. Apparently, the PP Wizard assumes all Slidemaster plates are 8" or larger. Mine is a 6" plate, so gives up some room needed.