XB 21 2+2 TM Shaft Length

[tap_tap_boom]

Hey guys, I'm at work and just found a killer deal on a 112 Fortrex that someone swapped with an Ultrex. Anyone happen to know what our TM shaft length is 45" or 52"? Thanks, Mike

[BASS 1]

I believe you'll need 45"

[tap_tap_boom]

I'll be happy camper if that's actually the case!

[scj]

I've never needed anything more than 45" but the boat will accommodate either just fine. If you frequent rough water, go 52"

[tap_tap_boom]

I fish both the Delta and Clearlake and both are known to get quite windy at times which is why I need to upgrade the 80 that's on there now as I'm often at 100%. When there is a good roller the prop does come out of the water so I bet I do have a 45"..but I've managed so I think it could work. Thanks

[Tim Powell]

45, a 50+ would not allow the rod locker doors to open while stowed

[xb03fs]

36 works but will come out in rough water. You have a lot of space

[tap_tap_boom]

Thanks guys, hope I can get it! -Mike

[fishnfireman]

Most places it will be fine..
45 won't work in West Texas if you fish open water on these big reservoirs.
Some of the places I fish- the prop on a 52 comes out of the water before the carpet starts getting wet.
So I fish the 60 now..