87 Champ 176
Working through a few things, need input from the experts out there.
When I acquired this boat for resto it had an Eagle 9000 at the console which I am fairly certain was wired to a transducer on the trolling motor. The cable to the transducer was cut which I have removed (but not yet pulled the wires out yet).
There are not any other transducers external on the boat anywhere. The 1240a flashes but I don't think its reading correct depth as the cable does not appear fully connected coming out of the 1240a, hard to push the 2 connectors together.
Going to try and trace the wires down but was it common practice to mount transducer for the flasher in the hull somewhere?
I am in the process of mounting an Lowrance HDS 9 Gen 2 and may remove the Flasher altogether but trying to see if it is actually working or not.
Also, in the pic below, is this a temp sensor next to the speedo pitot? I assume that would have been connected to the eagle 9000 that was in there?
Thanks in advance for any helpful feedback.