Can anyone recommend the best type of trailering bracket / transom saved for a Triton TRX18 with a 200 Opti please
Can anyone recommend the best type of trailering bracket / transom saved for a Triton TRX18 with a 200 Opti please
Motor mate
Largemouth Lou's motor toter.
I also have a 2016 18TRX with a 200 Opti and I purchased a Motor mate #203 and I love it very sturdy!
I've had a look at both of the suggestions online and have used a similar product to the motor mate. What I don't understand is how themotormate is a transom support when it fits between the motor clamps and engine mounts, really a tilt and trim saver. Now the Lou's motor toter looks to support the transom by running from the trailer to the engine mounts however, that appears to transfer road and trailer shock directly into the engine as the trailer moves independent to the boat.
Would love to hear from the manufactures of these or the boats with their opinion
I can't see how the Motor mate can help the transom either but it will keep the motor straight which helps the hydraulic steering.
Looking at those 2 designs I'm wondering if there is a place for "deluxe" model that essentially would be Lou's type but with a spring in the shaft so its telescopic with some give to make it less rigid
Spring would have to be huge to do any good. The boat doesn't move on the trailer, so it's not an issue.
I was told that if you use a Motormate it will void the warranty on the transom bracket on the motor and a very expensive repair. It sometimes breaks the bracket around the holes. Not sure if true, just what a (marine)dealer told me.. I'm not bashing motormate, just relaying what I was told.
It would definitely require a strong spring or flex area. If you ever get the chance, put a go pro camera on your trailer or boat and watch how much the trailer moves compared to the boat, you'll be surprised. The trailer flexes and vibrates under the boat and this is why a quality trailer is critical
Distance from the rear trailer cross member to the lower unit never changes on my trailer. I accidentally never lowered the motor enough to fully cover the nuts on Lou's motor totor, and drove 90 miles without having it fall completely off.
This is what was shipped with my new 189 TrX. I added the transom saver as an option when ordering... the Guardian Motor Support. It's solid. I like it a lot. The motor doesn't turn and it's well supported when trailering. I had one on my Stratos 295 for 25 years with no issues. You can see it mounted in the attached image...
http://bit.ly/2rZ4YPD
Last edited by OwascoAngler; 06-22-2017 at 07:52 AM. Reason: Added image
Thankyou, good info and looks like what Triton reccomend
Yes I use a Motormate , cuz my Lowrance SI transducer is mounted under my JP.. Love it and works great
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
Murph44 what do the straps hooked to the motor mount do?
That's the straps to my cover...
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360