Mazco Prop For 20xd

[Texas 20xd]

Anyone running RE4 on their 20xd hull. I have a 30p enroute for mine. Running 300xs on 14" hydrodynamics plate with 1.62 sporty. Wondering if anyone has experience with this set up

[tlt20xd]

I am interested in your results. I just put a 1:62 on mine but only have a 12 " plate. 300 xs W / DBR

[Just in time]

I ran one with a phase 3 Ox66 and found it to handle well but it just fell short on the big end for me compared to a few others I ran.

[Texas 20xd]

Probably about 3-4 weeks before i run it. How is the DBR mods working for you and which one did you put on. Also did you do install? I've been looking at that kit as well.

[tlt20xd]

Very strong in the midrange limiter raised I only run to about 6400 or so. And a lighten flywheel. It does have a very small miss a idle that I can't get out but runs very well .with the 1:75 and a 31 hydro it was running 94.something and had some water in the well. Need to start over on setup now with the 1:62 lowers.