have a question i just put a new master cylinder on my trailer and went to bleed the breaks and there isnt anywhere to bleed them from thereis 2 hoses going to each caliper crack the nut for the hose?
have a question i just put a new master cylinder on my trailer and went to bleed the breaks and there isnt anywhere to bleed them from thereis 2 hoses going to each caliper crack the nut for the hose?
Should be a bleeder valve on one caliper that only has one hose. That will do them all.Originally Posted by 09ranger520
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
No bleeder on any of them
Follow the hoses. One caliper has a hose that goes someplace besides the master cylinder or another caliper. That has to be your bleeder because fluid can't go in a circle.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Probably DB-35.
http://cartowdolly.com/wp-content/up...B35-Manual.pdf
the hoses feed from the bottom and exit from the top which feeds the bottom of the next etc Check out the left front caliper. It should have a bleeder on top.
Reply With Quote