2nd GPS mounting

[Bill2e]

What are you all using to mount a 2nd GPS in the cleat hole?

i hate to lose the cleat, but don't see another location.

[castforcash]

If you can find the 2 hole oval mount for the larger size ball, it fits screw pattern almost perfect. You just have to open the holes up a bit on the mount. You will want to thru bolt it if you're mounting a big graph. This means you will have to remove your control box so you can get your hand in there to install the nuts.

[bigbass225]

Don't lose it.... this has worked fine on my cats from 2008 till my current 16....

[GRR884]

I had made my own on last boat. I don't believe there is anything on the market of that.

[castforcash]

I had made my own on last boat. I don't believe there is anything on the market of that.

That's a nice clean way to do it. It's always good to figure out a way to mount stuff utilizing existing holes. I'm guessing there would be some interest in buying that bracket, very nicely done!

[Bill2e]

Don't lose it.... this has worked fine on my cats from 2008 till my current 16....

i can't make that set up work on my 2007.

[castforcash]

What are you all using to mount a 2nd GPS in the cleat hole?

i hate to lose the cleat, but don't see another location.

Look at grr84set up, that's a great way to do it....

[bigbass225]

i can't make that set up work on my 2007.

Sure it will send me a pic... there should be plenty of room in the side of the console either under the windshield or on he flat part!

[Bill2e]

It's a moot point now - I found an in dash mount from Bass Boat Technologies that solved my issue.

http://www.bbcboards.net/showthread....67#post8524767