Results 1 to 13 of 13
  1. #1
    Member
    Join Date
    May 2017
    Location
    Texas
    Posts
    5

    USA 2003 Champion 187 DC

    This is a new bass boat for me and the first. Just getting into bass fishing.. been a fly fisherman most of my life.

    Does anyone know where i can get an owners manual.

    When fishing this week with my son and grandson i noticed the bilge pump took about 10 min to empty and this happened several times.
    Of course the drain plug was installed. We were not using the livewells and the dial under the control arm was turned to shut off.

    The boat runs great 150hp very solid and fast.

    Any info would be greatly appreciated

  2. Member
    Join Date
    Apr 2015
    Location
    Homer, La
    Posts
    1,786
    #2
    Where did water come from 187 great boat ��

  3. Member
    Join Date
    May 2012
    Location
    Indianapolis, Indiana
    Posts
    865
    #3
    Good chance you have a broken plumbing fitting. Happened to me on my Champ. I ended up pulling all of the batteries out and removing the tray that they sit on so I could see down in the bilge. Then I took it to the lake and backed it into the water but left it on the trailer. It became very obvious then. My issue was a cracked hose barb on the livewell valve assembly.
    2004 Ranger 519VX
    Yamaha VMAX 200HP OX66

  4. Member
    Join Date
    May 2012
    Location
    Indianapolis, Indiana
    Posts
    865
    #4
    double post....
    2004 Ranger 519VX
    Yamaha VMAX 200HP OX66

  5. Member
    Join Date
    May 2013
    Location
    Castlewood, VA
    Posts
    289
    #5
    I had a livewell pump housing cracked on mine that caused the same thing also

  6. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,840
    #6
    Dicky....check my answer to your post in the Lounge regarding manual, etc.

    Welcome to the Champion family!

  7. Member shaneomac1's Avatar
    Join Date
    Jul 2011
    Location
    Hueytown, AL
    Posts
    471
    #7
    what kind of speed you getting? i have a 2005 with a 150 efi and getting 58-59
    2005 Champion 187
    2005 Mercury 150 EFI



  8. Member
    Join Date
    May 2017
    Location
    Texas
    Posts
    5
    #8
    Quote Originally Posted by shaneomac1 View Post
    what kind of speed you getting? i have a 2005 with a 150 efi and getting 58-59

    Getting about the same speeds.. have a Bombadier 150hp pushing the boat. Little over 62 when alone.


    Might be a little faster if i can figure out what's happening with the water getting in the boat.

    Have a great Memorial day be safe

  9. Member shaneomac1's Avatar
    Join Date
    Jul 2011
    Location
    Hueytown, AL
    Posts
    471
    #9
    SAME to you as well
    2005 Champion 187
    2005 Mercury 150 EFI



  10. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,840
    #10
    Dicky....check the livewell fittings and get back with us. As suggested, remove anything keeping you from seeing down into the bilge and back trailer into water far enough to get water under the rear of the boat.....

  11. Member
    Join Date
    May 2017
    Location
    Texas
    Posts
    5
    #11
    Thanks to all found the problem many of you as indicated livewell fittings.

    Does anyone know where i can get a users manual.

    Thanks

    Dicky

  12. Member Royjulius's Avatar
    Join Date
    Jul 2008
    Location
    Rapid City, SD
    Posts
    6,690
    #12
    The manuals are pretty generic. I have mine for 2000 but I never refer to it for repairs.
    25th Anniversary Champion 187 SCX Elite
    Mercury 175 EFI
    Perception Pescador Pro 120 Kayak
    Aquos 10ft Pontoon Boat


  13. Member
    Join Date
    Jun 2008
    Location
    TN
    Posts
    13,449
    #13
    There is accompany called Flow Rite that probably has everything you need. Try and see if google locates their website.
    GETFISHED !!!