I am going to instal my easy view tackle system. Can I just screw it in on the underside of the big front center locker? The screws seem short enough to do this.
Thanks for any help
I am going to instal my easy view tackle system. Can I just screw it in on the underside of the big front center locker? The screws seem short enough to do this.
Thanks for any help
2010 Nitro Z7
2001 Nitro NX882 (for sale)
2013 Ranger Z520C (gone)
2004 Skeeter ZX190 (gone)
1987 Ranger 375V (gone)
I called him and I can drill directly into the lids on my z520c, here is a photo
Last edited by MWeb; 05-27-2017 at 01:43 PM.
2010 Nitro Z7
2001 Nitro NX882 (for sale)
2013 Ranger Z520C (gone)
2004 Skeeter ZX190 (gone)
1987 Ranger 375V (gone)
I would love to do something like this, but cannot get past the drilling into the lids. Maybe some automotive double sided tape?
BTW looks great.
2013 Z118 w/Merc 150 4S
3 packs of senkos fit in one package, you can have 3x as much hanging there, and the kitechs would have to get consolidated into old senko packs... looks good
Filling it up......I keep my keitechs on the clam shells because i think it keeps them running in proper form and straighter
2010 Nitro Z7
2001 Nitro NX882 (for sale)
2013 Ranger Z520C (gone)
2004 Skeeter ZX190 (gone)
1987 Ranger 375V (gone)
Why did you install the left side over the weatherstrip?
2017 Ranger Z520c "Blackout Edition"
2017 Mercury Optimax ProXS 250
HB Solix 12 G3 MSI+, Solix 12 G2 MSI+, Solix G2 MDI+, Solix 12 2d/gps, Ultrex Mega360, Mega Live
NRA Life Member
-Be sober, be vigilant; because your adversary the devil, as a roaring lion, walketh about, seeking whom he may devour-
2013 Z118 w/Merc 150 4S
2011 Ranger Z518
Yamaha VMAX SHO 200
If you don't want to drill into the lid, use some 3M 4300/5300 or industrial velcro to attach strips of plastic cutting board and put the screws into that.
2013 Ranger Z520c, 2013 Yamaha 250 SHO
2018 Ranger RT198p, 2013 Mercury 150 Optimax
This. ^ If you don't think that tape is strong, I installed some easy-view brackets on a previous boat using the 3M tape on pieces of wood firring strip, then screwed into the wood. When I sold the boat and went to remove the wood strips, ended up splintering the wood into pieces before I could pry the tape loose from the underside of the lid. Strong stuff!
John Clark — Findlay, Ohio
Well I just ordered some parts and going to try and make my own easy view plastic organizer.
2013 Z118 w/Merc 150 4S
I have a complete Easy View set with the stick on tabs, if you don't want to drill, that I am going to be advertising on BBC Miscellaneous today.
2015 Ranger Z119c / 2015 Merc 225 Pro XS
Not a great system.....
Soon after install, the bags overload the lid support and the deck lid won't stay in the open position and must be held open.
Later the Ranger hinge itself fails and the rivets need replaced.
And then the Frito bag clips ( thats where these come from) closure force get weak and won't hold the bags crossing waves or trailering...then the metal clips rust/fail from all the boat's moisture as they are just painted cheap metal and not stainless steel.
If the weight of what I have on there fails the dual support arms on this lid then it has nothing to do with the east view tackle system, Ranger just uses piece of shit parts lol. I have literally all of 1 pound of weight on there
2010 Nitro Z7
2001 Nitro NX882 (for sale)
2013 Ranger Z520C (gone)
2004 Skeeter ZX190 (gone)
1987 Ranger 375V (gone)
You can also do yourself a favor and install the bags closer to the front of the lid so the weight does not affect the lid operation.
2013 Z118 w/Merc 150 4S
2017 Ranger Z520c "Blackout Edition"
2017 Mercury Optimax ProXS 250
HB Solix 12 G3 MSI+, Solix 12 G2 MSI+, Solix G2 MDI+, Solix 12 2d/gps, Ultrex Mega360, Mega Live
NRA Life Member
-Be sober, be vigilant; because your adversary the devil, as a roaring lion, walketh about, seeking whom he may devour-
2014 Ranger Z520C, Yamaha 250 SHO
I have a full system in my triton. Works great. I even left one just for chips, jerky, and peanuts. Love it, and so do the kids. They know there is snacks hidin somewhere. Lol. As far as mounting i guess im lucky. Triton has the ribs on bottom of lids. So i screwed into those. But it does come with the plastic clips and zip ties for mounting that would work well for 3m tape.