I have two props . One is a Raker 24p. 14 1/4" The other is a 26 pitch 14 1/4" I'm not sure what brand since it is not on the prop anywhere . The only numbers are on the hub#505055 although the hub looks a lot like that of a Stiletto.
I have two props . One is a Raker 24p. 14 1/4" The other is a 26 pitch 14 1/4" I'm not sure what brand since it is not on the prop anywhere . The only numbers are on the hub#505055 although the hub looks a lot like that of a Stiletto.
1995 CHAMPION 171 DC
raker 24p should work good for you,,,26p gonna be to much prop for you to turn i feel.
On most boats this is correct, the 24 Raker will be the ticket with that 150 Intruder. I had a 175 Fast strike on a Stratos, and even with motor mods it would only turn the 26 Raker (that had a bit of extra cup too) if I was solo.Originally Posted by 185er
2021 Phoenix 920 Elite / SHO 250
Bullet 21XD / 250 XB (Gone to a great home in LA)
"There is no such thing as a bad day fishing!"
My old Fast Strike 175 on a 19 foot Stratos loaded swung a 24 Raker easy,,,,,but each boat and motor are different. Example-is motor up to snuff/running good/tuned properly/not wore out/motor height or jackplate/hull in good shape,,,ect. May be a good baseline but some experimentation with a few props may be the ticket for best results.
Age and treachery will always overcome youth and skill !!
Engine has just been broken in from a re build . New block, pistons etc. Lower end was rebuilt as well.
1995 CHAMPION 171 DC
Should be a good starting point then and may work just fine. Just remember to prop it to stay in the advertised power band/rpms at wide open throttle.
Age and treachery will always overcome youth and skill !!
I have a 15 x 15 for the same engine, what you think about that?
he'll spin it to the moon and back.
so is good or not? hahahaha
A 15 " diameter prop with a 15* pitch would not be good for his motor. It would be a good prop for a pontoon boat and say a 90 HP motor but not a high performance application.
Have you a suggestion?
What boat? If it's a normal sized bass boat for that engine than it's hard to beat a 24 Raker for top end
2021 Phoenix 920 Elite / SHO 250
Bullet 21XD / 250 XB (Gone to a great home in LA)
"There is no such thing as a bad day fishing!"
Javelin bass boat 18'
the old one was 14.25x23
24 raker is what you need!
That was prob a Renegade. Great prop, might need to be reconditioned and they usually benefit from some extra cup being added. Raker 24p is the right prop if you want to go to a 3 blade, and should be a bit faster.
2021 Phoenix 920 Elite / SHO 250
Bullet 21XD / 250 XB (Gone to a great home in LA)
"There is no such thing as a bad day fishing!"
Just realized you hijacked a thread from back in May. You should have started a new thread.
Ohh sorry about
finally the store just have 14.25x23
Is there any marking on the prop barrel like Renegade or Raker? Is it a pressed in hub? If it is what are the numbers on it? 3 blade or 4? Raker props come in even pitches and have a 14.25" diameter, a Renegade is a 4 blade prop and comes in odd pitches and the diameter is usually 13.5". You may have a Mercury prop as they come in odd and even pitches.
Aluminium prop
3x14.2x23
evinrude alu
Fine for a spare.
Reply With Quote