So I posted about this a little while ago, basically my factory installed Minnkota charger (440PC) mounts broke away from the charger. I called Minnkota and they asked what boat it was in and I told them. They said that its a known issue with the ZX line of boats because Skeeter used a very thin piece of aluminum to mount the charger and allows it to flex too much in rough water and that causes the plastic mounts to fatigue and break. To address the issue Minnkota came up with a new mounting kit that from how it was explained to me uses rubber mounts and is through bolted through the existing thin aluminum plate. Its on its way, just thought I would give you a heads up. I may find a thicker piece of aluminum as well!