Made the switch from lowrance to helix 9 right now im not too happy...not sure if i got settings wrong or a bad transducer or what..... taking all the help i can get thanks
Made the switch from lowrance to helix 9 right now im not too happy...not sure if i got settings wrong or a bad transducer or what..... taking all the help i can get thanks
Last edited by luxrybound; 05-21-2017 at 09:59 PM.
Looks like you have a lot of prop wash in that shot .... and you need to post some bigger images.
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
this is on a phoenix 721 factory installed unit if its prop wash any suggestions on a fix
Not necessarily a fix .... you could have run back over your own path ....or the path of another boat.
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Be sure you have a HD transponder and it beats the one that came in the box with your Helix. I just did it this week! The best use of $200 you will ever have. Now I can see the trees etc.
How deep were you in this shot? Change your 2d to 200/80 and you'll get arches.
I get that in the spring when the pollen is thick.
you need to play with the settings, i switched from lowrance too and was skeptical because the picture didn't seem as good. but once you dial them in, they're good if not better!
Sensitivity is cranked up too high
Ranger z520 // Mercury 250 Pro XS
12ft BT Talons/112 Ultrex/Hbird 360