has anybody ever mounted a talon side mount bracket to a pro hi-jacker plate? can't get mine up high enough. thanks
has anybody ever mounted a talon side mount bracket to a pro hi-jacker plate? can't get mine up high enough. thanks
I don't know your set up but you may have to drill your jp like is done on the Bobs jp to get it higher..
i did on a 6 in pro hijacker... will get pics.
Screenshot_20170517-195229.jpg
Last edited by cwilt; 05-17-2017 at 06:54 PM. Reason: add pic
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!
if your gonna go to the top two bolts, you will need to modify the bracket. i did'nt want to drill or shave down the mount. i dont have any issues with dragging water.
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!
it's a 2002 stratos 20xl prostar. cwilt... that's how i had mine. called minnkota they say not to alter the bracket
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!
it drags a lot of water. can't get the boat to plane out
55 pounds heavier, try and load the bow down with gear or a buddy, or drop the pitch on your prop 1. Now besides that is the Talon as high as it can go on the high end of the bracket?
I had problems planing my boat. 17' Champion with a 115. I was going to change props and even try a 4 bladed prop. Someone suggested for me to try a hydrofoil. I bought one for around $50 at Bass Pro and it fixed my problem. It planes almost as fast as before and it actually handles much better on plane than it ever did. Also, have you mounted the bracket as close to the transom as you can? Getting it snug will help reduce some of the drag.
yes it was as high as i could get it. i've taken it off now. don't know how to put pictures on here
nova, pm me your cell number and i'll show you what i did.