Thread: 87 Champion

Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    May 2017
    Location
    Green Bay, Wisconsin
    Posts
    539

    87 Champion

    I came across this. I think it is an 87 super v fish and ski. Looking to get into an OK starter boat. Any info on this model possible issue to keep an eye out for.

    https://appleton.craigslist.org/boa/6099812610.html

    Thx

  2. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,545
    #2
    201 fish n ski model. You want to check the transom to make sure it's not wet or rotted. Also have the engine checked out.

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,276
    #3
    Check the floors for soft spots around the drain holes and ski locker if it has one or the third seat base. Gonna need some water sanding for sure.

  4. Member
    Join Date
    May 2017
    Location
    Green Bay, Wisconsin
    Posts
    539
    #4
    Going to need a wet sand and polish,. Good advise on the transom and floors, do you expect there is wood under the Glass? Checking the motor is a must, I expect it will either be a decent find or a pile.

  5. Member
    Join Date
    Oct 2015
    Location
    On the water in Texas
    Posts
    130
    #5
    That year will have wood in it
    1990 Champion 184sc 1980 150 Mercury
    1998 Champion 190dc 1998 200XRI Mercury

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,276
    #6

  7. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,840
    #7
    Properly sealed wood is not a problem...EVER. However, the transom needs to be checked, just in case. Hope all is good!