Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22
  1. Member
    Join Date
    Jun 2016
    Location
    Louisiana
    Posts
    14
    #21
    thanks guys, guess that's not an option to talk with Ben. I looked at the seat last night and I agree it doesn't look very easy. Just wish the designer/builder would have taking in consideration future panel removals on these boats because the live well control panel is worse than the main control panel to remove. no ratchet type devise will help on that panel because you cant even see the top screw or even got your hand close to the screw. thanks again

  2. Member
    Join Date
    Jun 2004
    Location
    Scranton, PA
    Posts
    4,422
    #22
    you can get it out with a 90* screw driver or the ratchet set from MSC that the bits push through the handle.

    It's a slow go. AFTER all the screws are IT WILL BE STUCK TO THE VINYL, YOU WILL HAVE TO PRY THE PANEL UP WITH SOMETHING.

    You can pull the switch up/out through the front, but you better have a replacement switch, the keeper ears on the switch will be broken.

    Not the easiest thing to take apart, but I've worked on things harder then that panel.

    JAZII

Page 2 of 2 FirstFirst 12