Results 1 to 8 of 8
  1. #1
    Banned
    Join Date
    Feb 2005
    Location
    ypsilanti
    Posts
    66

    Looking for new 4 bade

    Ok 21xdc I need a 4 blade for my boat time for handling over speed, what do you recommend

  2. Banned
    Join Date
    Jul 2016
    Location
    New Iberia, LA.
    Posts
    73
    #2
    What motor and lower unit are you running?

  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,465
    #3
    He has a 200 Yamaha OX66.... I think the ProMax, TXP-OT4, or Fury4 would be the 3 choices I would consider... Since you already ran the worked 26 Bravo1 and didnt like it.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Banned
    Join Date
    Feb 2005
    Location
    ypsilanti
    Posts
    66
    #4
    What pitch should I get

  5. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,465
    #5
    Are you still running a 26P TXP3? What rpms and speed? The 25-26P Fury4 would be one of the first choices. I wish you could try one before you buy.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  6. Banned
    Join Date
    Feb 2005
    Location
    ypsilanti
    Posts
    66
    #6
    Yespn still running that, not sureally about pms think around 5800, speed Is down to around 71

  7. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,465
    #7
    I'd probably get a 25P Fury4. 25 TXP-OT4 or 25P ProMax would also be nice to try.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  8. Member Garfish's Avatar
    Join Date
    Feb 2007
    Location
    Marietta, Ga
    Posts
    16,081
    #8
    Quote Originally Posted by stratman295 View Post
    Yespn still running that, not sureally about pms think around 5800, speed Is down to around 71
    What boat, normal load, jack plate if any, and has your engine been re-built with a Wayne Worthy Phase 1,2 or 3 kit? 5800 rpm, 71 mph doesn't seem to bad from just what I see with a 25 p prop on 200 anything. Unless it's an Allison, Blazer, small Bullet or maybe a Stroker.