Electric plug for 2006

[Eddie Howard]

Can anyone tell me the plug I will need for a 36 volt Ultrex to a 2006 Trx21hp?

thanks..

[Smallmouthguy]

If your running 36 v now should be the same one.

[Eddie Howard]

Don't have the plug, trying to determine what plug I need.

[gambler4]

Mine is hardwired

[marshall256]

Do a search for the Battery Tender Trolling Motor Plug. That's what I have and it has been great. All of the factory style plugs I wound up replacing every 2-3 years and always found the hot wire terminal slightly melted. I did research on the Battery Tender Trolling Motor Plug...it's good for 12 - 48 V 2 wire DC applications and can handle more amps than a 36 volt TM can produce at 100% Power. They are not cheap, but like their slogan says...it's the last trolling motor plug you'll ever buy.

[Mark Weare]

I had mine hard wired for years but now use the battery tender connector and really like it. I have more than 1 TM and this allows for quick exchange if needed (failure, damage etc).

http://products.batterytender.com/Ac...Set-Black.html

[Savage]

I still have the original Marinco plug in mine.

[Eddie Howard]

Thanks everybody for your imput.....I really do appreciate you..

Eddie

[basshole51]

https://www.amazon.com/MinnKota-MKR-.../dp/B001PTHKRQ

i have run the Minn Kota plug for years without issue...next plug will be the battery tender plug though.