-
One more question
On the 90 Johnson 200
after installing the new pump kit, I started it on muffs and noticed a little bit of water seeping out between the lower unit and midsection. Where the two mate together and the bolts are. It's not a lot but enough for me to notice and I really don't know if it was doing that before I dropped the foot. I know the pump is connected to pipe because soapy water came out of the midsection just above the cavitation plate at initial start.
I guess it's normal but want to be sure, I didn't screw anything up. Everything is tight and I used gasket adhesive on housing and cup and d ring
-
Sprint Boats Moderator
-
Reply With Quote
