Would you guys be skeptical to putting a 250 Verado on a 216 Coosa just because of the weight and the transom?
Would you guys be skeptical to putting a 250 Verado on a 216 Coosa just because of the weight and the transom?
I personally would not be skeptical.. If the transom is solid, there shouldn't be a problem.
Do it as long as it is a Verado 250 Pro. Either would be fine imo but the 250 Pro has a little more power.
Last edited by Sports1; 05-03-2017 at 11:09 AM.
Post pics once you do it. The v rod will cost a chunk. I don't think you can run standard merc controls. I think anyway. I was going to go 250 pro xs. It was going to be 17500 or so with my controls. The v rod was 21k or so I believe.
I run a 225efi on mine with a 12" jackplate, and know guys that run 14" plates. The hull likes a lot of weight/leverage to get the bow to lift at speed. The construction of my hull is as good as I've seen on any bass boat.
So a V-Rod should match up well, with the extra motor weight it probably would need less setback, which reduces the stress on the transom.
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs