Bow 360 adapter for non-Ultrex 360 coming soon

[Wayne P.]

http://www.humminbird.com/Products/AD-UL360/

[kry29]

Man, there is going to be some pissed off people that sold the 360 they already had to get the ultrex version

[dk239]

If the adapter doesn't come any sooner than the Solix units it's not a big deal!!!

[TroyBoy30]

You can't get an ultrex now anyway. Some etas show July

[jimmybass2]

These are SUPER EASY to disassemble and reassemble!!! If you can turn a screwdriver and remove a rubber plug, you are well on your way!

Pricing?

[jimmybass2]

You can't get an ultrex now anyway. Some etas show July

WHAAAAAT??? Cabela's site says 2-3 weeks!!?! Are you sayin they just want my money?

[sfw1960]

WHAAAAAT??? Cabela's site says 2-3 weeks!!?! Are you sayin they just want my money?

You mean the same "big C" that always sells "backorderable" merchandise, even IF they have NO idea if & when they'll see all TWO of them??

[TroyBoy30]

WHAAAAAT??? Cabela's site says 2-3 weeks!!?! Are you sayin they just want my money?

most of the eta's say pending but some same 7/7

i do have 1 in stock

Minn Kota Ultrex 112/US2 Trolling Motor w/i-Pilot Link & Bluetooth - 36V-112lb-60"

[jimmy7]

built my own...

at least i dont have to wait until July

[TroyBoy30]

waiting is not a bad thing in this case. hopefully they are working on some issues

[scubatelco]

Nice job Jimmy. I like the extra tubing too. How about a bracket for the the Terrova.

[jimmy7]

no clue on terrova, i dont have one :) I think that application would take some creativity

I had to do the tube to accommodate the shorter shaft length on the standard 360. I also made the extension tube longer than necessary to account for my 52" ultrex. I wanted to be able to keep the 360 really deep to keep it in the water for fishing in big waves. However it does required an allen wrench to adjust the height of the 360 which can be a pain on the water (however the minn kota mount also requires this)

[Meleagris1]

Anyone install one of these yet? Pics?

[rampaage]

In the process of making an adapter myself with a buddy that has a automated plasma cutting table and is a welding master. I will post some pics when we get it done and may take some orders if people are interested.

[gitzit26]

Has anyone used or bought an UL360 yet?

[ralphc]

Has anyone used or bought an UL360 yet?

I'm in the process of installing the Ultrex with i-Pilot link and have converted. my 360 from my Forte with the UL360. Easy, solid no problem at all. Easy to remove so you don't have to leave it on the boat.

[gitzit26]

Ralph could you show me some pictures of your UL360 mounted?

[170xped]

It should be the same as the one Wayne posted the link to in the first post

[Hookerz Tackle]

I thought there couple people out there already that were selling aftermarket adaptors for the old version 360 to the new Ultrex? Was going to start doing some research in near future being will be swapping my Terrova on my rig out for the Ultrex in near future.. I currently run separate style mount for my 360 that has bracket that holds it over the bow..

Not looking to buy different 360 just so its mount is made for Ultrex.. About time I do that they will come out with Mega 360.. lol

Not all the Ultrex are backordered or sold out.. I have access via one of my Distributors to the Ipliot 112# 60" and 80# 60".. The rest ya good luck.. lol

[gitzit26]

That's correct but I wanted to see it mounted