Leaking compartment

[EdDavisKY]

Got caught in a frog choker today and front compartment was almost flooded, sealant I used finally gave up when I pulled the Lazy Susan.
Not going to mess with it anymore, anybody remember the size plug needed for the underside of the seat pedestals.
Had a pretty good size plastic box to hold a lot of miscellaneous gear, what could float was floating, living room is now a hook and skirt drying room LOL.
Did a search and either asked wrong but was getting front compartment leaking for about every brand rig on BBC.

Thanks ahead of time.

[vausoner]

Can you make a drain and get it to the bilge?

[921screaming250]

Look on the Phoenix accessories page,they are there

[EdDavisKY]

double post

[EdDavisKY]

Jason had the drain system and soft PVC fitting over base rippet hence system failure.

921screaming250 have you got a link, only accessories I can find are under apparel.

[SPMIDD]

Here is the link for you.

https://phoenix-boat-apparel.myshopi...ogo-base-cover

[fishin couillon]

Bob's makes a plug with or in and suppose to be watertight.....

http://www.bobsmachine.com/DeckPlugs...311-000001.htm

[vausoner]

Jason had the drain system and soft PVC fitting over base rippet hence system failure.

921screaming250 have you got a link, only accessories I can find are under apparel.

Gotcha. Good luck.

[EdDavisKY]

Thanks guys. Guess I should have been saying cap for underneath seat pedestal and not plug. As wanting to try and totally do away with the drain system.

[Mark H.]

Is this what your looking for? This is what I used on my 921 when I removed the STS system. Only did it to one pedestal post (back) and put a 1" drain plug in the front. Couldn't get it on the very front cause it was to close to the front wall of the compartment so I just plugged it but you can't put seat pedestal in cause of plug but I didn't use it anyway.

[EdDavisKY]

Thanks Mark! Have got that on hand if my set up does not work. Bought some Light PVC caps and put them on the seat pedestals, real tight fit so should work....did not glue as of yet. Put seat pedestal in farthest from bow before putting cap on.