Prop to Pad measurement

[jasonmcfatter]

Mercurys needs to keep a minimum of 15-17 PSI of water pressure at WOT. http://www.bassboatcentral.com/measuring.htm

ive never got that in a mercury. ive always been 10-12.

[90 5.0]

Mercurys needs to keep a minimum of 15-17 PSI of water pressure at WOT. http://www.bassboatcentral.com/measuring.htm

Thats the worst prop to pad hieght measuring document I've ever read I think.

#2 is the only one that's half right and it's not right either.

[hooken203]

I just rechecked mine last night. The front point on my gear case is not the same height as the center of the propshaft 3/8" difference.

[90 5.0]

I just rechecked mine last night. The front point on my gear case is not the same height as the center of the propshaft 3/8" difference.

Exactly and some are father off than that.

[AllyFishing]

always go by the end of the propshaft with the dimple in it. as I've been told

[Tim Powell]

Thats the worst prop to pad hieght measuring document I've ever read I think.

#2 is the only one that's half right and it's not right either.

my thoughts exactly.

I always measure to the center of the propshaft, not the point or cone as they can be off.