Need to add length to Powerpole hoses..any suggestions?

[MRichard]

Hello

Bought used powerpoles...noticing the hoses seem abit short for my boat setup

Wondering if I can use 1/4 soft copper and adapt to existing with compression or flared fittings(plumber at work)...or better to use something else?

Any suggestions would be greatly appreciated !

Thanks in advance

[KandKKustomz]

Give powerpole a call, tell them you need some tubing they will hook you up, the less connections in hydraulic lines the better.

[MRichard]

Thank you sir!

I will give them a try

[KandKKustomz]

They should take good care of you, if for some reason you want to go the route of adding i have some left over tubing here, you can have it just pay shipping costs.

[MRichard]

Thank you again...talked to Mike @ Powerpole and he took care of it !

Best customer service!

[KandKKustomz]

Yes sure is and Mike is great!

[GreatAvalon]

PowerPole does it again...

[MRichard]

Just wondering ...do all the powerpole pumps etc..use the same size hoses?

Think I told Mike @ Powerpole I had the sportsman series but its the Pro II series , just want to make sure the hoses are the same size

[KandKKustomz]

All C monster powerpoles 2012 thru 2016 use 5/16". Older models without c monster were 1/4" 2017 models with c monster 2.0 are real hydraulic hoses.

[MRichard]

All C monster powerpoles 2012 thru 2016 use 5/16". Older models without c monster were 1/4" 2017 models with c monster 2.0 are real hydraulic hoses.

Many thanks..again!

[pajoe329]

While where on the subject on lines question is if by chance a line springs a leak would you be able to cut it and splice it with a 5/16 brake line compression fitting till new lines come in .

[KandKKustomz]

yes you could use the proper size compression fitting.