On my 2000 model Procraft SuperPro 190, the rubber pieces on the bottom of the seats designed to absorb shock are crumbling apart. Where do you get replacements??
Thanks!
On my 2000 model Procraft SuperPro 190, the rubber pieces on the bottom of the seats designed to absorb shock are crumbling apart. Where do you get replacements??
Thanks!
Don't know the answer to that. The guy who did my sheets fabbed some out of plywood to make my seats sit right. He then covered them in carpet. Lools good. You could do the same then get some rubber from a stall mat or something to give shock absorption. Mine I can't tell a difference in them.
https://www.etrailer.com/ they have rubber trailer bumpers that you could probably make work.
The part is garelick 99191.
http://www.iboats.com/Replacement-Se...view_id.713759
This is what I used on mine.
2019 nitro z19 with mercury 4 stroke 200hp.
Does that interfere with the use of the storage compartment under the seat? Really all I need is 4 of the rubber pieces for each seat. On my boat the hole in the center of the rubber slips onto a screw covered with a plastic sleeve, one on each corner of the seat, so I need 8 of the rubber shocks, I don't really need the metal part. The shape of the rubber pieces looks correct in the photo.
This is for 2 rubber pieces, Even though the picture shows the metal frame.
Replacement Seat Shock for Active Seat Suspension System - Garelick
Price: $22.21
Save: $3.78
(14% Off $25.99)
Part # 99191
2019 nitro z19 with mercury 4 stroke 200hp.
Not a problem, someone on this forum helped me for the same past years ago...
2019 nitro z19 with mercury 4 stroke 200hp.
I used some tennis balls under my seats, works better than the original rubber did.